 |
|
|
|
|
|
|
Remote Display Features:
- reduces machine setup time
- optimizes system calibration
- position data monitoring
- velocity data monitoring
- high intensity LCD for easy viewing
- panel mount installation
|
|
|
AMCI Series 6000 Remote
Display |
AMCI's Series 6000 Remote Displays are devices
that allow position or velocity data to be shown at locations
that are different from the AMCI module.
Typical applications mount the display on or near the machine
to allow for quick visual references while calibrating the
machines settings or for regulating productivity. Technicians
can monitor position data in programmed scale factor units
or oversee the velocity in RPM.
Besides added convenience, this time saving product also
ensures that your equipment is operating at optimum levels
of performance. Check our compatibility table below to see
if your module is eligible for a Series 6000 Remote Display.
COMPATIBILITY:
AMCI Series 6000 Remote Display Compatibility Table
back
to top ^ |
 |
PLC Modules |
|
|
Compatible Displays |
|
|
Displayed Data |
| 1431-03 |
6100F or 6200F |
position only |
| 1441-03 |
6100F or 6200F |
position only |
| 1461-01 |
6100F or 6200F |
position only |
| 1541-03 |
6100F or 6200F |
position, tachometer, stop time, or stop angle,
selectable only from PLC |
| 1731-03 |
6100F or 6200F |
position only |
| 1761-01 |
6100F or 6200F |
position only |
| 7451-01 |
6100F or 6200F |
position only |
| 8213 |
6100F or 6200F |
position or velocity, selectable from
6102 |
| |
8513-01 |
6100F or 6200F |
position or velocity,
selectable from 6102 |
| |
Stand Alone Controllers |
Compatible Displays |
Displayed Data |
| |
GN3B1-01A-01 (Genesis)
GN3B1-01B-01 (Genesis)
|
6102 |
position or velocity, selectable
from 6102 |
| |
iPCE-X-YD
X=# of channels
Y=# of output type |
6101F |
position or velocity. For two channel
units, position and velocity from both channels |
| |
iPLC-X-YD
X=# of channels, 1, 2, or 4
Y=# of output type
|
6101F |
position or velocity. For multi-channel
units, position or velocity from all channels |
| |
iPLC-2-YMDO
iPLC-2-YNDO
Y=output type
|
6101F |
position or velocity |
|
SPECIFICATIONS:
AMCI Series 6000 Remote Display back
to top ^ |
|
Remote Display |
|
|
Functionality |
| 6100F |
displays position, BCD output
in negative logic |
| 6200F |
displays position, BCD output in negative logic,
smaller face plate than 6100F |
| 6101F |
displays position or velocity
on 1 or 2 channels. no transducer fault message. |
| 6102 |
displays position or velocity. no transducer fault
message. |
| |
Power requirements |
|
all of the remote display units
require 50mA at 110Vac. |
|
|
|
