Network Ready NEXUS SSI Interface
For Industrial Control |
Advanced Micro Controls, Inc. recognized the increased use
of SSI sensors in industrial applications and developed a
network-ready interface. The NX2E4_ is capable of interfacing
your network directly to four SSI sensors and can be used
in applications ranging from rotary to linear to laser position
sensing.
This module also incorporates diagnostics that constantly
monitor system integrity and report any errors to the PLC.
| Network Ready
NEXUS SSI Interface For Industrial Control |
| AMCI Model # |
NX2E4_ (please specify network when ordering) |
| Network availability |
NX2E4C (ControlNet)
NX2E4D (DeviceNet)
NX2E4E (Ethernet IP)
NX2E4P (Profibus)
NX2E4T (Modbus TCP/IP) |
| Number of channels |
4 |
| DC supply requirements |
500 mA @24Vdc (does not include sensor requirements) |
| Transducer compatibility |
Balluff / MTS / SICK / Stegmann / Allen-Bradley 842A
Encoder
---------------------------------------------------------------------
Also interfaces to most sensors that output SSI data |
| Cable requirements |
transducer dependent |
Sensor Input
Connectors
(4 per unit) |
AMCI Part # = MS-7P
Phoenix Contact Part # = MC1,5/7-ST-3,81
Four Connectors are included with the unit

Caution: The +24Vdc output pin (#6)
is directly connected to the +24Vdc pin on the Power
Connector. |
| Required hardware |
na |
| Optional hardware |
na |
| Additional network device interfaces
& controllers by AMCI:
|