AMCI 7300 Series SSI / LDT Interface
PLC Module for GE Fanuc 90-30 |
Supplying absolute position and velocity data to your programmable
controller, the single slot 7351 Linear Displacement Transducer
interface module is a direct connection between Balluff
and MTS linear displacement transducers (LDTs) and the GE
90-30 PLC. The 7361 is a direct connection for most transducers
that output SSI data. Both modules have module and transducer
cable diagnostics that constantly monitor the integrity of
the system and report errors to the programmable controller.
The modules have two front panel LEDs for status indication.
The 7351 offers programmable position resolution down to 0.001"
(one thousand counts per inch), while the 7361's resolution
is limited only by the resolution of the sensor. Programmable
features include: position preset, count direction, and data
scaling.
Product
Specifications: |
| AMCI Module |
7351 |
7361 |
| PLC platform |
-GE Fanuc 90-30
-PACSystems RX3i |
-GE Fanuc 90-30
-PACSystems RX3i |
| Position sensor |
LDT - start/stop or pwm |
SSI |
| Maximum resolution |
0.001"/0.1mm |
transducer dependent |
| Number of channels |
(1) channel |
(1) channel |
| Transducer compatibility |
Balluf / MTS / Ametek / Turck
------------------------------------
above brands with start - stop or pwm digital outputs
|
Balluff /MTS /SICK /Stegmann Allen-Bradley: 842A Encoder
------------------------------------
Also interfaces to most sensors that output SSI data |
| Velocity update time |
32ms/120ms selectable |
programmable 1-1000ms |
| DC supply requirements |
230ma @5Vdc |
230ma @5Vdc |
| Cable requirements |
sensor dependent |
sensor dependent |
| Required hardware |
external power supply for sensor |
external power supply for sensor |
| Optional hardware |
na |
na |
| Additional AMCI modules for GE Fanuc 90
30 & PACSystems RX3i PLCs: Resolver
Interface |
90-30
Series 
