 |
| » GE
Fanuc » 90-70
Series: PLS Controller |
|
|
| |
 |
- G.E. licensed technology for reliability
- Direct interface with GE Fanuc 90-70 PLC
- Supplies position, tachometer, and fault data
- Industry leading warranty and support
- 100% compatible with entire line of AMCI
brushless resolvers and resolver transducers |
|
|
AMCI 2900 Series Programmable Limit
Switch PLC Module for
GE Fanuc 90-70 |
AMCI Model: #2900 Series
Turning outputs on and off based on machine shaft position
is a basic control principle in use today. However, PLCs cannot
control these outputs accurately because of long and inconsistent
scan times.
The solution: AMCI's 2900 Programmable Limit Switch
Modules. These modules accept one resolver input for shaft
position feedback and control outputs based on the resolver
position, programmed on/off setpoints, and programmed speed
compensation values, without processor intervention.
Product
Specifications: |
| AMCI Module |
2931 |
2941 |
| PLC platform |
GE Fanuc 90-70 |
GE Fanuc 90-70 |
| Position sensor |
resolver |
resolver |
| Maximum resolution |
1024 |
4096 |
| Number of channels |
(1) |
(1) |
Number of I/O
D = Direct
B = Backplane
RB = Relay Board |
8 out D
na
na |
8 out D
na
na |
| Transducer compatibility |
|
|
| Output update time |
200us |
200us |
| Tachometer update time |
programmable 32, 60, 120, or 240ms |
programmable 32, 60, 120, or 240ms |
| DC supply requirements |
1.0 Amp maximum @ 5Vdc |
1.0 Amp maximum @ 5Vdc |
| Cable requirements |
CTL-X |
CTL-X |
| Required hardware |
na |
na |
| Optional hardware |
na |
na |
Additional AMCI modules for General Electric
Fanuc 90-70:
Resolver Interface : SSI
/ LDT Interface |
Visitors who viewed this page also
looked at these programmable
limit switch solutions »
|
|
90-30
Series 
