 |
|
|
- Specially designed for press control applications
- Supplies position, tachometer, and fault data
- Licensed by Rockwell Automation's Allen-Bradley
- Seamless integration with the PLC-5 PLC
- 100% compatible with entire line of AMCI
brushless resolvers and resolver transducers |
|
 |
|
Stamping Press Control PLC
Module For Allen-Bradley PLC-5 |
AMCI Model: PLC-5 #1731-03
AMCI Model: PLC-5 #2731-33
AMCI Model: PLC-5 #2762-17
Our PLC-5 family of stamping press controllers
extends to three of the PRESSPro Series Modules. For years
the 1731-03 has been used on stamping presses for monitoring
brake wear and crank angle. The 2731-33 is a resolver based
PLS used for top stop control. Our latest PRESSPro module
for PLC5 is the 2762-17. This stamping press control
module has been used to control shut height and stacker/destacker
operations of presses. For more information on all of these
modules, please refer to the table below.
SPECIFICATIONS: Stamping
Press Control PLC Module For Allen-Bradley PLC-5 |
| Module |
1731-03 |
2731-33 |
2762-17 |
| PLC platform |
PLC-5 |
PLC-5 |
PLC-5 |
| Position sensor |
resolver |
resolver |
resolver |
| Max. full scale count |
1024 |
1024 |
4096/turn |
Number of I/O
D = Direct
B = Backplane
RB = Relay Board |
1 in D / 0 out D
na
na |
1 in D / 8 out D
na
na |
1 in D / 8 out D
na
na |
| Number of channels |
(1) channel |
(1) channel |
(2) channel |
| Output update time |
na |
200us |
na |
| Tachometer update time |
32, 60, 120,
or 240ms |
32, 60, 120,
or 240ms |
32, 60, 120,
or 240ms |
DC supply requirements
5 Vdc
24 Vdc |
625mA
na |
750mA
na |
800mA
na |
| Transducer compatibility |
|
|
|
| Cable requirements |
CTL-X |
CTL-X |
CML-X |
| Required hardware |
na |
na |
na |
| Optional hardware |
|
na |
na |
Additional stamping press control plc modules
by AMCI:
ControlLogix
| CompactLogix
|
MicroLogix | SLC500 |
|
|
Select
PLC:
