HTT-400-1 Redundant Brushless
Resolver Transducer |
The HTT-400-1 transducer is an industry standard 4 inch diameter
package that has separate connectors for each of the resolvers.
AMCI also offers the HTT-20-1
which is our smallest redundant resolver package and should
be used when mounting space is at a premium.
The other area of application for the HTT-400-1 Redundant
Brushless Resolver Transducer is when you must run two resolver
based systems from a single shaft that require different resolvers.
AMCI can install any size 11 resolver in the HTT-400-1, making
it compatible with resolver based systems from all major manufacturers
in the industry.
MECHANICAL SPECIFICATIONS: |
|
HTT-400-1
Redundant Brushless Resolver Transducer |
| Shaft loading:
100 lbs. Radial / 50 lbs. Axial maximum shaft loading.
At the listed shaft load, bearing life is rated for
a minimum of 2X10ˆ9 revolutions. |
Starting torque:
8 oz. in max @25° C |
Moment of inertia:
8.75 X 10ˆ-4 oz-in-secˆ2 |
Weight:
5.25 lbs. |
Housing:
anodized aluminum |
Shaft:
1070 carbon steel |
HTT-400-1A Connector Pinout: (Military
Equivalent Part #: MS3102E16S-1P)
The HTT-400-1A has two connectors that are externally
marked as Resolver A and Resolver B.
Resolver A & B Pinouts:
A = R1
B = R2
C = S4
D = No Connection
E = S2
F = S1
G = S3
HTT-400-1S Connector Pinout: (Military
Equivalent Part #: MS3112E12-10P)
The HTT-400-1S has two connectors that are externally
marked as Resolver A and Resolver B.
Resolver A & B Pinouts:
A = S4
B = S2
C = S3
D = S1
E = R2
F = R1
G = no connection
H = no connection
J = no connection
K = no connection
|
|
ELECTRICAL SPECIFICATIONS: |
|
HTT-400-1
Redundant Brushless Resolver Transducer |
| Any Size 11 Resolver manufactured by AMCI can be installed
in the Redundant Brushless Resolver Transducer packages.
The following table gives the electrical characteristics
of the AMCI standard resolver, the R11X-J10/7, which is
compatible with all of our electronics.
See our Size
11 Resolver page for a complete list of available
resolvers. |
| Input frequency:
5,000 Hz |
Rotor input voltage:
7.0 V rms |
Stator output voltage:
6.65 V rms |
Transformation ratio:
0.95± 5% |
Input current:
20 mArms typical, 34 mArms max. |
Phase shift:
10° max. |
Accuracy:
max. error: +7 minutes |
|
ENVIRONMENTAL SPECIFICATIONS: |
|
HTT-400-1
Redundant Brushless Resolver Transducer |
| Operating temperature:
-40° C to 125°C (-40° F to 257° F) |
Shock:
50 G's for 11 mSec |
Vibration:
15 g's to 2,000 Hz |
Enclosure:
IP67 with mating connector properly installed |
|
COMPATIBLE CABLES & CONNECTORS: |
|
HTT-400-1A
Redundant Brushless Resolver Transducer |
Mating
Connectors: (2 required - sold separately)
| |
AMCI part# |
Military equivalent |
Straight
90 Degree
Watertight |
MS-16
MS-18
MS-161 |
MS3106A16S-1S
MS3108A16S-1S
MS3106F16S-1S |
Connectors are sold separately or as part of a pre-assembled
cable. |
Cables:
(2 required - sold separately) HTT-400-1A series transducers
use the following cables:
| |
AMCI part# |
Uses Connector |
| |
CTL-(x)
CTL-(x)/MS18
CTL-(x)/MS161 |
MS-16
MS-18
MS-161 |
For all cables, (x) = length of cable in feet. |
|
| HTT-400-1S Redundant Brushless
Resolver Transducer |
Mating
Connectors: (2 required - sold separately)
| |
AMCI part# |
Military equivalent |
| Straight |
MS-25 |
MS3116F12-10S |
Connectors are sold separately or as part of a pre-assembled
cable. |
Cables:
(2 required - sold separately) HTT-400-1S Resolver Transducers
with connectors use the following cables:
| AMCI part# |
Uses Connector |
|
| CTL-(x)/MS25 |
MS-25 |
|
For all cables, (x) = length of cable in feet. |
|
Single-turn 
Many applications require redundant control systems to meet
mandated safety standards or a project's up time requirements.
The HTT-400-1 Redundant Brushless Resolver Transducer is designed
to help you meet these standards and requirements. This transducer
features two independent resolvers geared 1:1 to the input
shaft that are encased in an IP67 rated anodized enclosure.
Using anti-backlash gearing to insure accuracy and repeatability,
the zero points of the two resolvers are mechanically aligned
at the factory.
telephone: 860-585-1254
email: