HTT-400-X Brushless Multi-turn Dual
Resolver Transducer |
FEATURES: |
|
- Direct replacement for AVG Autotech SAC-RL210
- Can be ordered with AMCI, AVG or other compatible resolvers
- Redesigned for 100% mechanical compatibility
- Superior durability in harsh environments
- Ideal for high-shock applications
- 4" diameter anodized aluminum housing
- Interchangeable and field replaceable conduit and connector
terminations
- 100% compatible with AMCI's complete line of resolver
interface products when ordered with AMCI resolvers
|
DESCRIPTION |
|
 Redesigned
for complete mechanical and electrical compatibility with
AVG/Autotech SAC-RL210 transducers, the HTT-400-X transducers
are IP64 rated heavy-duty 4 inch diameter resolver based transducers.
Available with a 1 inch conduit fitting or military connector,
all of our size 400 transducers feature a unique termination
block that allows you to switch between conduit and connector
terminations in the field. Not only does this allow you to
reduce the number of spares you need to stock, this system
also allows you to make connector and conduit repairs in the
field, sometimes without removing the transducer from the
machine.
In addition to termination flexibility, the HTT-400-X transducers
can be ordered with
a wide variety of resolvers to match your control system needs.
Combined with our industry best lead times, the HTT-400-X
transducers allow you to design new systems around an industry
standard package, or quickly upgrade or
repair existing machines.
Available gear ratios include:
- 128:1 Autotech compatible gear-down
- 180:1 AMCI compatible vernier arrangement
Consult the factory for the availability of other gear ratios.
|
MECHANICAL DRAWINGS |
|
Termination adapters:
All HTT-400-X transducers internally have terminal blocks
for resolver connections that are easily accessed by removing
the unit's back cover. Two termination adapters are available
for the HTT-400-X transducer. When an HTT-400-X is ordered,
one of the termination adapters is factory installed on the
transducer based on its complete part number. Both termination
adapters can be ordered separately under the following part
numbers.
MS-TAC: 1" conduit termination adapter
MS-TA19: MS-19 termination adapter (MS3112E14-19P connector)
Termination adapters are also sold as kits which include
the adapter, gasket, and four mounting screws. The connector
of the MS-TA19 adapter comes with pigtail wires that will
be wired to the HTT-400-X transducer's internal terminal block.
|
MECHANICAL SPECIFICATIONS: |
|
HTT-400 Brushless
Multi-turn Dual Resolver Transducer |
| Shaft loading:
100 lbs. radial/50 lbs. axial maximum shaft loading.
Bearing life rated at 2X10^9 revolutions minimum at
maximum shaft load. |
Starting torque:
8 oz. in max @25° C |
Moment of inertia:
8.75 X 10ˆ-4 oz-in-secˆ2 |
Weight:
4.80 lbs. |
Housing:
anodized aluminum |
Shaft:
1070 carbon steel |
Connector Pinout: ("S" Termination
or MS-TA19 Adapter) (Military Equivalent Part
#: MS3112E14-19P)
A = R1 of Fine and Coarse Resolvers
B = R2 of Fine and Coarse Resolvers
C = S1 of Coarse Resolver (CS1)
D = S2 of Coarse Resolver (CS2)
E = S3 of Coarse Resolver (CS3)
F = S4 of Coarse Resolver (CS4)
H = S1 of Fine Resolver (FS1)
K = S2 of Fine Resolver (FS2)
L = S3 of Fine Resolver (FS3)
M = S4 of Fine Resolver (FS4)
G, J, N, P, R, S, T, U, V = no connection
|
|
ELECTRICAL SPECIFICATIONS: Standard =*R11X-J10/7 |
|
| |
Resolver
Type |
| -J (AMCI Standard) |
-L (AVG/Autotech Standard) |
| Operating Frequency |
5000Hz |
2250Hz |
| Rotor Input Voltage |
7.0Vrms |
1.88Vrms |
| Stator Output Voltage |
6.65Vrms |
2.6Vrms |
| Transformation Ratio |
0.95+5% |
1.40+5% |
| Input Current |
20mArms max. |
20mArms max. |
| Phase Shift |
10° max. |
10° max. |
| Accuracy |
+7 minutes max |
+7 minutes max |
| Other resolver types and high accuracy units
are available. Please consult factory. |
|
ENVIRONMENTAL SPECIFICATIONS: |
|
HTT-400-X Brushless
Multi-turn Dual Resolver Transducer |
| Operating temperature:
-20° C to 125° C (-4° F to 257° F) |
Shock:
50 G's for 11 mSec |
Vibration:
15 g's to 2,000 Hz |
Enclosure:
IP64 |
|
COMPATIBLE CABLES & CONNECTORS: |
|
HTT-400-X Brushless
Multi-turn Dual Resolver Transducer |
Mating
Connectors: (sold separately)
| |
AMCI part# |
Military equivalent |
| Straight |
MS-19 |
MS3116F14-19S |
Connectors are sold separately or as part of a pre-assembled
cable. |
Cables:
HTT-400-X Resolver Transducers with connectors use the
following cables:
| AMCI part# |
Uses Connector |
|
| CML-(x)/MS19 |
MS-19 |
|
For all cables, (x) = length of cable in feet. |
|
|
Single-turn 
click
here for .pdf version of this drawing
telephone: 860-585-1254
email: