NX3A1-PP2 NEXUS PRESSPro II Stamping Press Automation
Description
NX3A1_PP2 NEXUS Networked I/O PRESSPro II Stamping Press Automation
AMCI makes it easy and affordable to upgrade your PLC-based stamping press system with sophisticated controls that are usually associated with large, expensive machinery. The NEXUS PRESSPro II incorporates “hard to find” stamping press automation functions, normally purchased individually, into a single product that saves time & money. These functions include:
A) Brake Monitor
AMCI’s PRESSPro II uses a resolver-based brake monitor to measure braking performance and alert operators if preset stop time limits are exceeded. The monitor’s advanced warning enables stamping press operators to schedule maintenance at the factory’s convenience, avoiding an unplanned shutdown.
B) Die Protection
Operating errors such as misfeed, short feed, long feed, buckle detects & part eject can ruin a die and disable your press. Prevent costly repairs and/or damage to your dies by protecting against unexpected events using the PRESSPro II die monitoring function.
C) Tonnage Monitor
Extend the life of your stamping press and dies using the PRESSPro II tonnage monitor to optimize ram force and prevent excessive hard hitting. Capacity, high, low, and data window set points can be configured; if any of the set points are crossed an error will be reported to stop the press.
D) Programmable Limit Switch (PLS)
The PRESSPro II incorporates a resolver-based high speed PLS controller that synchronizes external equipment with machine timing such as; feed, part transfer, conveyor control, etc. A heavy duty absolute resolver reports accurate control position of the stamping press stroke, which eliminates time consuming adjustments associated with rotary cam
Available Versions
NX3A1-PP2: Stamping press automation controller with network connection
Price | $3,590/ea
Note: Pricing is US Domestic only
Consult the factory for availability
Contact SalesNEXUS PRESSPro II Stamping Press Automation
AMCI makes it easy and affordable to upgrade your PLC-based stamping press system with sophisticated controls that are usually associated with large, expensive machinery. The NEXUS PRESSPro II incorporates “hard to find” stamping press automation functions, normally purchased individually, into a single product that saves time & money. These functions include:
AMCI NEXUS PRESSPro II
|
 |
|
||
|
limit switches replace antiquated rotary cam switches that are inflexible, subject to wear, and slow down your production changes. |
NX3A1_PP2 Features
- Brake monitor
- Die Monitor/Protection
- Tonnage Monitor
- High speed Programmable Limit Switch
- Choose ControlNet, DeviceNet, EtherNet IP, Modbus TCP/IP, Profinet, or Profibus
PLC-Based Specialty I/O Solutions
Functionally, the AMCI NEXUS controllers and interfaces deliver the same level of PLC integration as their plug-in module counterparts, but with much more flexibility from a systems standpoint. Rather than limit these versatile products to one PLC brand or specific backplane, all units are Din-rail mountable and equipped with a network interface that allows connection to various controllers. AMCI NEXUS specialty I/O integrate with ANY network enabled PLC using Ethernet I/P, Modbus TCP/IP, Profinet, Profibus, ControlNet, or DeviceNet.
The flexibility of a NEXUS controls solution saves time and money, letting customers choose whatever PLC best meets their needs, or change PLCs without having to re-specify and repurchase plug-in modules. And because the NEXUS integrates via network communication, PLC platforms no longer restrict compatibility and integration.
Compatible Networks
NEXUS is compatible with any networked PLC that supports these networks
The Best PLC Integration Available
AMCI products are uniquely designed to provide the best PLC integration available. Unlike other products that require a separate software package for configuration or operation, AMCI's PLC-based products are programmed using your PLC's software - nothing new to buy or learn!
Our expertise with the leading PLC manufacturers (e.g. Allen-Bradley Schneider, GE, etc) is unmatched when it comes to high performance Specialty I/O, Position Sensing, and Motion Control technology.
Program Using Your Existing Software
AMCI's products program using your PLC's native software - nothing new to learn or buy!
Specifications
Product Specifications
| AMCI Module | NX3A1_PP2 |
|---|---|
| Network Availability | NX3A1A-PP2 (Profinet) NX3A1C-PP2 (ControlNet) NX3A1D-PP2 (DeviceNet) NX3A1E-PP2 (Ethernet IP) NX3A1P-PP2 (Profibus) NX3A1T-PP2 (Modbus TCP/IP) |
| Programmable Limit Switch | Sensor feedback: resolver Number of resolver channels: 1 Number of high speed outputs: 16 Motion detect output : 1 Fault output: 1 Output update time: 50us |
| Brake monitor | Number of brake monitor inputs: 1 Current supplied: 15mA @ 24Vdc required (Input Relay Dependent) |
| Die Protection | Die monitoring inputs: 16 discrete Input scan time: 500us Power requirement: each input sources 0.5mA of current Five die protection types: • Normally true • Normally false • Cyclical • Constant • Quick |
| Tonnage Monitor | Number of strain gauge inputs: 4 Reference voltage: 5Vdc Current supplied: 100mA max Signature Data: 256 bytes of strain gauge data stored on every cycle of the press |
| Diagnostics | Signature analysis: outputs tonnage data directly to controller/display for visually mapping force profiles |
| Power Supply | Range: 18 to 30Vdc. Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges Dedicated power supply (only for press control devices) recommended |
| Environmental | Operating Temperature: 0 to 60° C Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges Dedicated power supply (only for press control devices) recommended |
| Transducer compatibility | H25 / HT-6 / HT-20 / HT-400 HT-20-(X) / R11X-J10/7 |
| Cable Requirements | CTL-X |
| Input connector | Resolver Input Connector (1 per unit) AMCI Part # = MS-8 Phoenix Contact Part # = MSTB2.5/8-ST-5.08 One connector is included with the unit  |
Product Specifications
AMCI ModuleNX3A1_PP2
Network AvailabilityNX3A1A-PP2 (Profinet)
NX3A1C-PP2 (ControlNet)
NX3A1D-PP2 (DeviceNet)
NX3A1E-PP2 (Ethernet IP)
NX3A1P-PP2 (Profibus)
NX3A1T-PP2 (Modbus TCP/IP)
NX3A1C-PP2 (ControlNet)
NX3A1D-PP2 (DeviceNet)
NX3A1E-PP2 (Ethernet IP)
NX3A1P-PP2 (Profibus)
NX3A1T-PP2 (Modbus TCP/IP)
Programmable Limit SwitchSensor feedback: resolver
Number of resolver channels: 1
Number of high speed outputs: 16
Motion detect output : 1
Fault output: 1
Output update time: 50us
Number of resolver channels: 1
Number of high speed outputs: 16
Motion detect output : 1
Fault output: 1
Output update time: 50us
Brake monitorNumber of brake monitor inputs: 1
Current supplied: 15mA @ 24Vdc required (Input Relay Dependent)
Current supplied: 15mA @ 24Vdc required (Input Relay Dependent)
Die ProtectionDie monitoring inputs: 16 discrete
Input scan time: 500us
Power requirement: each input sources 0.5mA of current
Five die protection types:
• Normally true
• Normally false
• Cyclical
• Constant
• Quick
Input scan time: 500us
Power requirement: each input sources 0.5mA of current
Five die protection types:
• Normally true
• Normally false
• Cyclical
• Constant
• Quick
Tonnage MonitorNumber of strain gauge inputs: 4
Reference voltage: 5Vdc
Current supplied: 100mA max
Signature Data: 256 bytes of strain gauge data stored on every cycle of the press
Reference voltage: 5Vdc
Current supplied: 100mA max
Signature Data: 256 bytes of strain gauge data stored on every cycle of the press
DiagnosticsSignature analysis: outputs tonnage data directly to controller/display for visually mapping force profiles
Power SupplyRange: 18 to 30Vdc.
Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges
Dedicated power supply (only for press control devices) recommended
Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges
Dedicated power supply (only for press control devices) recommended
EnvironmentalOperating Temperature: 0 to 60° C
Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges
Dedicated power supply (only for press control devices) recommended
Optimum: 670 mA @ 24Vdc (Does not include load on Strain Gauges
Dedicated power supply (only for press control devices) recommended
Transducer compatibilityH25 / HT-6 / HT-20 / HT-400 HT-20-(X) / R11X-J10/7
Cable RequirementsCTL-X
Input connectorResolver Input
Connector
(1 per unit)
AMCI Part # = MS-8
Phoenix Contact Part # = MSTB2.5/8-ST-5.08
One connector is included with the unit
Connector
(1 per unit)
AMCI Part # = MS-8
Phoenix Contact Part # = MSTB2.5/8-ST-5.08
One connector is included with the unit
AMCI makes buying PLC-based automation easy...our sales group will help you:
- Select the right product for your application
- Pay by credit card using your Visa, Mastercard, Discover, or American Express
- Coordinate alternative payment methods (P.O., wire transfers, etc.)
- Locate a distributor convenient to your region of the country
Contact AMCI Sales today:
860-585-1254
Ordering Information
AMCI's sales team takes the hassle out of placing your order. We'll advise on product selection, alternatives, lead times, and present you with point of purchase options. Call (860) 585-1254 or email AMCI sales today!
Resources
PRESSPRo II Brochure
AMCI makes it easy and affordable to upgrade your PLC-based stamping press system with sophisti...
Download PDF