Stepper Motor Drive - 4.0 Amp (115VAC)

• Speeds up to 50 rps (3000 rpm)
• Full or half step
• 170 V bus
• Output rms current up to 4.0 A, selectable in 0.1A increments
• Amplifier disable input
• Fault output
• 0% or 50% idle current reduction

AMCI Model: #SD17040

The SD17040 4.0 Amp stepper motor drive has the ability to interface to any controller that produces step and direction or CW/CCW pulses. The inputs accept differential line driver signals or can be connected to transistor type outputs with the use of current limiting resistors.

The SD17040 4.0 Amp stepper motor driver is a self-contained stepper motor drive with its own power supply, full and half step sequencer, two switching amplifiers, and opto-isolation circuits.

The SD17040 also contains idle current reduction circuitry that automatically lowers the motor current when the motor is not turning.

Phase current and full or half step motion are selected by a series of DIP switches accessible on the top of the SD17040.

AMCI SD1740 will work with any controller/indexer that generates a step and direction pulse. Below are the various Stepper Control Solutions AMCI has to offer:

AMCI 3200 series stepper motor controller for Allen Bradley ControlLogix PLC

AMCI 3601 stepper motor controller for Allen Bradley CompactLogix PLC

AMCI 3601 stepper motor controller for Allen Bradley MicroLogix PLC

AMCI 3401 series stepper motor controller for Allen Bradley Point I/O

AMCI NEXUS multi-axis stepper motor controller for industrial networks: ControlNet, EtherNet IP, DeviceNet,Profibus, and Modbus TCP/IP

See additional stepper motor drives by AMCI: SD7540A | SD17060B | SD17080 | SD17098i | SD31045 | SD31060i

AMCI makes buying Stepper Drives easy...our sales office will help you:

• Select the right Stepper Drive for your application
• Pay by credit card using your Visa, Mastercard, Discover, or American Express
• Coordinate alternative payment methods (P.O., wire transfers, etc.)
• Locate a distributor convenient to your region of the country