Stepper Motor Drive Indexer - 6.0Arms/8.4A
peak (230VAC) |
The AMCI SD31060i represents an integrated approach to your
networked stepper application.
In addition to its integrated design that eliminates the
need for a separate stepper controller and stepper drive,
this network ready drive indexer is powerful. Engineered to
reliably run AMCI's complete line of NEMA size 23 to NEMA
size 42 high torque stepper motors, the SD31060i is the performance
leader in its class.
Stepper Motor Drive
Indexer - 6.0Arms/8.4A peak (230VAC) |
Network Connectivity:
- SD31060IC (ControlNet)
- SD31060ID (DeviceNet)
- SD31060IE (Ethernet IP)
- SD31060IP (Profibus) |
ELECTRICAL SPECIFICATIONS:
|
|
Stepper Motor Drive
Indexer - 6.0Arms/8.4A peak (230VAC) |
Amplifier type:
Bipolar with two MOSFET H-bridges; average
current control, 20 kHz PWM |
Number of phases:
(2) two |
Input power:
95-240 Vac, 50/60 Hz |
Encoder input:
5 Vdc differential |
Note:
AMCI stepper motors are designed for 310 Vdc operation.
Other manufacturer's motors may not be compatible with
the SD31060i 310V bus. Contact motor manufacturer for
compatibility. |
OPERATIONAL SPECIFICATIONS: |
|
Stepper Motor Drive
Indexer - 6.0Arms/8.4A peak (230VAC) |
Current rating:
6.0 Arms (average current) / 8.4A peak (peak
current)
NOTE: There
are 2 ways to express the magnitude of current in microstepping
stepper motor drivers, RMS and Peak.
1 amp RMS = 1.414 amp Peak.
AMCI's SD31060i stepper motor drive indexer is rated
for 6.0 amp RMS or 8.4 amp
Peak.
RMS vs Peak Current
- more
info »
|
Maximum velocity:
motor/lead dependent |
Output current:
1.0A through 6.0A in 0.1A increments, programmable from
the network |
Maximum operating temperature:
50° C ambient temperature |
Idle current:
40% to 100% after 3 seconds without a step |
Motor connections:
Eight lead series or parallel, six lead series or center
tapped, or four lead motors |
Breakout box wiring:
A 25 pin breakout box and an interface cable is included
with each SD31060I.
|
Stepper Motor Drive
Indexer - 6.0Arms/8.4A peak (230VAC) |
Hardware protection:
Interlock connection to prevent damage if motor
connector is removed with power applied. Short circuit
protection - phase to phase and phase to ground. Overtemperature
circuitry. |
Stepper Motor Drive Indexer - 6.0Arms/8.4A
peak (230VAC) |
AMCI makes buying Stepper Drives easy...our sales office
will help you:
Contact AMCI Sales today:
telephone: 860-585-1254
email: sales@amci.com |
24-75
VDC input: 
