Readme

1. The EDS files are added to RSNetworx using the EDS Wizard.
2. All AMCI ControlLogix modules will communicate with the PLC and function correctly without installing their EDS file.  However, they will appear as Unknown Devices in RSNetWorx. 
3. All AMCI modules are classified as Specialty I/O modules. While you can select any icon to represent your AMCI module, the Pink I/O Icon is the one typically used to represent the Specialty modules.

4. There are two versions of the EDS file for the AMCI 1241 and 1242 modules.  The 1241_1242_R01.EDS will work for revision 1.2 modules and the 1241_1242_R02.EDS will work for revision 2.3 modules.  The revision change was made on units with a serial number greater than 07100001.  Use the following steps to determine which revision your 1200 module is using.  

Go online with the PLC.
Right Click on the 1200 module in the project tree and select Properties.
Click on the Module Info tab in the window that appears.  
The 1200 modules revision will be shown in the left of the two columns.     


