This ZIP file contains 3D STEP models of the analog output DC60 Resolver
Based Encoders that are available from AMCI. 

The *.stp files follow the STEP 203 formats.
The *.dwg files follow the Autocad R14 format.

File Name Description:
   Each file name encodes the AMCI DC60 part number that the model
   represents.  Note that each model represents more that one DC60 part
   number.  For example, two parts that only differ in the shaft seal will
   have the same files.
   Parentheses are used in the file names to show when multiple values 
   can occupy the same slot in the part number without affecting the model.
      For example:
         The file name "DC60F1-(B,V)1(V,C)..." represents the DC60 part numbers:
            DC60F1-B1V...
            DC60F1-B1C...
			DC60F1-V1V...
            DC60F1-V1C...
			(The shaft seal material and output type have no bearing on the 
			 physical model of the unit.)
	
	The 'cccc' in the part number represents the number of turns for full scale 
	output. It has no bearing on the physical model, and ranges from 0001 to 1024.
      
Feel free to contact AMCI if you have any questions concerning these models.

Thank you for choosing AMCI.

AMCI Tech Support
(860) 585-1254
techsupport@amci.com

