Solutions for Allen-Bradley PLCs
As a long-time partner of Rockwell Automation, we at AMCI have developed dozens of reliable solutions for Allen-Bradley users. The videos below highlight a couple of our EtherNet/IP solutions, as well as instructional videos that demonstrate how straight forward programming can be.
Because our products are 100% compatible with Allen-Bradley PLCs, you can be confident that our solutions will work for your application. When you need a heavy duty, extreme environment or custom OEM solution, AMCI is your partner for success
Introduction
Understanding PLC-Based Stepper Motion Control (by The Journal)
The Journal from Rockwell Automation & AMCI Fundamentals Series Webinar
Learn about stepper motion basics; integrated steppers; applications; case studies that demonstrate stepper motion in use; the advantages and disadvantages of stepper control vs. servo control; and when to choose stepper motion control.
Duration 17:50
Product Videos
SMD Series for Allen-Bradley PLCs
AMCI’s SMD (stepper+motor+drive) product family includes DLR for EtherNet/IP, SynchroStep™ technology, IP67 rated versions, integrated encoder, gearboxes, NEMA size 23 & 24 size packages, and compatible cord sets. Watch the video to learn more about this comprehensive and inexpensive solution!
Duration 02:38
AnyNET Specialty I/O: PLC-Based Specialty I/O Solutions
AMCI’s AnyNET I/O family is a distributed I/O system that combines hard to find specialty functions with a network interface, simplifying installation and cutting costs.
Duration 01:25
AMCI ANG1(E) Stepper Controller/Drive with Network Interface
AMCI's ANG1(E) integrates drive and controller technology, simplifying installation and cutting costs. Move commands are easily programmed using RSLogix500 or Studio 5000, and cabling is drastically reduced with the ability to expand up to 6 axes of motion over a single network connection.
Duration 00:45
Programming How-To's
Programming EtherNet/IP PLC-based Devices
AMCI's Motion Control Product Manager, Matt Tellier, presents this tutorial about programming EtherNet/IP PLC-based devices. He goes over the hardware often required as well as the typical software options available from most device manufacturers. He discusses the advantages of a more integrated approach, and where such options can be found.
This webinar will help you understand the myriad of different ways PLC-based EtherNet/IP devices can be programmed to communicate with the PLC. It covers 3rd party vs native software, and explains how to use add on instructions.
Duration 14:47
EtherNet/IP Programming Made Easy Using EDS
AMCI's Motion Control Product Manager, Matt Tellier, presents this 25 minute webinar where he demonstrates the process of programming AMCI's EtherNet/IP motion control products using EDS files.
You'll see how much easier it is to add and program EtherNet/IP products when using EDS files, and he explains some short cuts this simplified approach provides.
Duration 25:38
